Toshiba e-studio281c - Page 260

e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
DRUM RELATED SECTION
11 - 14
(4) Lift up the transfer belt unit and insert the
screw removed in step (3) into the screw
hole on the front side.
Fig. 11-18
(5) Loosen 1 screw and take off the drum stay.
Fig. 11-19
(6) Remove 2 screws and take off the bushing of
the drum.
Fig. 11-20
Screw
Transfer belt unit
Drum stay
Bushing