Toshiba e-studio281c - Page 265

11
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
DRUM RELATED SECTION
11 - 19
[K] Drum thermistor (THM4)
(3) Take off the drum cleaner brush.
Fig. 11-33
(1) Take off the transfer belt unit
( P.14-8 "[A] Transfer belt unit / Transfer
belt cleaning unit").
(2) Take off the drum ( P.11-13 "[C] Drum").
(3) Take off the main charger unit
( P.11-15 "[D] Main charger unit").
(4) Remove 1 screw and disconnect the connec-
tor. Then take off the drum thermistor with its
bracket.
Fig. 11-34
(5) Remove 1 screw and take off the drum ther-
mistor.
Fig. 11-35
Drum cleaner brush
Connector
Drum thermistor
Drum thermistor
Screw