16
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
FUSER UNIT / PAPER EXIT SECTION
16 - 17
* The figures in the "Condition" field denote the priority of error checking.
* The figures in the "Error code" and "Counter" fields with parentheses denote that an error status has
not yet been determined (= error status is detected only once).
* The pre-running end temperature may vary depending on the temperature of the environment in
which the equipment is placed. When a temperature detected by the equipment is low (16°C or
below) the pre-running end temperature set at 08-422 will be applied, and in all other cases, the
temperature set at 08-411 will be applied.
At paper jam 1 250°C or above - - C449 29 On usual
- 250°C or above -
- - 250°C or above
Check
timing
Condi-
tion
Temperature judged
Error
code
Counter
(08-400)
Error
judging
timing
Main
thermistor
Sub thermistor
Front edge
thermistor
To Next Page
Loading...
