Toshiba e-studio281c - Page 88

e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 68
[J] KN-3511 (Bridge unit)
(1) Turn OFF the power and unplug the power
cable.
(2) Remove 2 screws and take off the cover.
Fig. 2-146
(3) Disconnect 1 connector.
Fig. 2-147
(4) Open the bridge unit. Remove 1 screw.
Fig. 2-148
Cover