1. Easy Setup Flow
Network Administration Guide — Setup Flow for Fax Features 45
z User Function Guide
4. SETTING ITEMS (ADMIN)
3. SETTING NETWORK FUNCTIONS
Setting the TCP/IP Protocol
Setting the HTTP Network Service
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the TCP/IP
Setting up the HTTP Network Service
3. Setting up the SMTP Client.
You should specify the SMTP server to be used for sending an Internet Fax.
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Network Settings
Setting up the SMTP Client
4. Setting the Internet Fax Settings.
In the Email Settings, you should specify the from address and from name to
enable the Internet Fax transmission. Also you can specify the fragment size,
and body text that apply to the Internet Faxes sent from this equipment.
z User Function Guide
4. SETTING ITEMS (ADMIN)
8. SETTING INTERNET FAX FUNCTIONS
Setting the Internet Fax Message Properties
Setting the Internet Fax Fragmentation
Setting the Internet Fax Body String Transmission
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Internet Fax Settings
Setting up the Internet Fax Settings
5. Setting up the Fax Settings.
Set the Fax device settings to enable the facsimile transmission from this
equipment. This is available only when the optional Fax unit is installed.
z User Function Guide
4. SETTING ITEMS (ADMIN)
5. SETTING FAX FUNCTIONS
Setting the Terminal ID
Setting the Fax Initial Setup
Setting the RX Printing
Setting the Recovery Transmission
z TopAccess Guide
7. TopAccess Administrator Mode
Setting up from TopAccess
Setting up Fax Settings
Setting up the Fax Settings
6. Registering the Relay Box with Email addresses.
The registration of the Relay Box can be done by users.
To Next Page
Loading...
Need help?
General
