2. Setting up Network Server
Network Administration Guide — Setting up NetWare Print Server 71
Create a Printer Agent
1. Right-click anywhere within the Parent Level (Tree or Context
under which the NDPS Printer Agent is to be installed) and
then choose [Create].
• The New Object dialog box appears.
2. From the “Class of New Object” list box, select “NDPS
Printer” and click [OK].
• The Create NDPS Printer dialog box appears.
3. Enter the NDPS Printer Name, then click [Create].
• The Create Printer Agent dialog box appears.
4. Enter the NDPS Manager name or click [Browse] to locate it.
5. Select “TOSHIBA NDPS Gateway Configuration” in the
“Gateway types” list, then click [OK].
• The Gateway Configuration dialog box appears.
6. Select the NDPS Gateway Printing Mechanism and click
[Next].
The configuration dialog that appears depends on the printing mechanism you
choose. A description of the configuration settings for each option follows. When
you finish configuring the Printer Agent, proceed to "Select Drivers" on page 72.
P.71 "LPR on IP"
P.71 "Queue-Based (NDS Printer Agent)"
LPR on IP
If you select the LPR Gateway configuration option, the Remote-LPR Printer Configura-
tion dialog box opens:
1. Enter the IP Address of the equipment and then click [Fin-
ish].
2. To confirm your choice, click [Yes].
When the update is complete, you can proceed to "Select Drivers" on page 72.
Queue-Based (NDS Printer Agent)
If you select the Queue-based (NDS Printer Agent) option, the Configure Printer Agent
dialog box opens:
1. Either type in the Advertising Print Server name, or click
[Search] to automatically locate print server information and
choose a device name from the drop-down list.
Once a server is selected, the remaining fields are populated with the
associated data.
To Next Page
Loading...
