05/08 Mode Element
Sub
element
Item Subitem Code
Sub-
code
Details
Default
value
cceptable
value
RAM Contents
Proce
dure
Servic
e UI
08 Setting
Mode
System User
interface
General 8948 Language package
information
- - - Displays the information of the installed language
package.
2Yes
08 Setting
Mode
8952 External version of
HDD data
- - - External version of file system for system software. 2
08 Setting
Mode
Printer Feeding
system /
Paper
transport
8967 Rotation printing by
guides width of
bypass feed tray
1 0-1 SYS If the printing size and the guides width of the bypass
feed tray are different, it is judged that paper is set in
the wrong direction. The occurrence frequency of
interruption by the error of the guides width may be
decreased. However, this code does not work
depending on the conditions, such as when stapling is
selected. Set this code when requested by user or the
guides width sensor is broken. Related code: 08-4621.
0: Invalid
1: Valid
1
08 Setting
Mode
System User
interface
General 8968 Language package
information (Panel
Help)
- - - Displays the language package information of the
installed Panel Help.
2
08 Setting
Mode
System User
interface
General 8969 Language package
information
(WebHelp)
- - - Displays the language package information of the
installed WebHelp.
2
08 Setting
Mode
System User
interface
General 8970 Language package
information (Service
UI)
- - - Displays the language package information of the
installed Service UI.
2
08 Setting
Mode
System User
interface
General 8971 Installation of
language package
- - - Installs the language package. 3
08 Setting
Mode
System General Self-certificate 8973 Length of public key 1 0-1 SYS 0: 1024 bit
1: 2048 bit
1
08 Setting
Mode
System General Self-certificate 8974 Signature algorithm 0 0-4 SYS 0: SHA1
1: SHA224
2: SHA256
3: SHA384
4: SHA512
1
08 Setting
Mode
System Network 8975 Data clearing of Point
and Print
- - SYS Point and Print in the equipment is deleted when this
code is performed. Perform this code when a trouble
occurs such as when uploading Point and Print is not
possible. After performing this code, upload Point and
Print from [Maintenance] menu in the [Administration]
menu of TopAccess.
3
83
To Next Page
Loading...
