Toshiba e-STUDIO656 - LCF Slant Adjustment

e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
ADJUSTMENT
6 - 104
6.19.2 LCF slant adjustment
Compensate the slant of LCF by the adjusting the stoppers.
<Procedure>
(1) Pull out the LCF from the equipment.
(2) Turn 2 screws and adjust the stoppers.
Turn to the right: Stopper moves downward.
Turn to the left : Stopper moves upward.
Note:
When moving the equipment, need to move the stopper upward.
Fig. 6-124