Toshiba e-STUDIO656 - Exit;Reverse Roller

4
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
DISASSEMBLY AND REPLACEMENT
4 - 135
4.12.21 Exit/reverse roller
(1) Take off the exit/reverse guide.
( P.4-123 "4.12.11 Exit guide / Exit/reverse
guide / Reading end guide")
(2) Remove 2 screws and take off the guide.
Fig. 4-383
(3) Remove 1 E-ring, 1 pulley, 1 pin and 1
bushing.
Fig. 4-384
(4) Take off the exit/reverse roller, remove 1 E-
ring and 1 bushing.
Fig. 4-385
Bushing
Pulley
Pin
E-ring
Bushing
E-ring