Toshiba e-STUDIO656 - Original Reading End Sensor (SR4)

e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 158
4.12.49 Original reading end sensor (SR4)
4.12.50 Original intermediate transport sensor (SR9)
4.12.51 Original reading start sensor (SR10)
(1) Take off the reading end guide.
( P.4-123 "4.12.11 Exit guide / Exit/reverse
guide / Reading end guide")
(2) Disconnect 1 connector. Release 2 latches
and take off the original reading end sensor.
Fig. 4-450
(1) Take off the reading start guide unit.
( P.4-122 "4.12.10 Reading start guide
unit")
(2) Release 2 latches and take off the original
intermediate transport sensor.
Fig. 4-451
(1) Take off the reading start guide unit.
( P.4-122 "4.12.10 Reading start guide
unit")
(2) Disconnect 1 connector. Remove 1 screw
and take off the sensor bracket.
Fig. 4-452
Original intermediate transport sensor