3
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
OUTLINE OF THE MACHINE
3 - 29
M26 IH-FAN-MOT
IH board cooling fan
Cooling down the IH board Fig. 3-15 24-17
M27 DCT-O-FAN-MOT
Duct out fan
Suctioning ozone generated at charging Fig. 3-15 33-3
M28 FUS-FAN-MOT
Fuser cooling fan
Cooling down the fuser Fig. 3-15 33-3
M29 EXIT-FAN-MOT
Exit section cooling fan
Cooling down the exit section Fig. 3-15 33-3
M30 DCT-I-FAN-MOT
Duct in fan
Cooling down the developer unit Fig. 3-16 42-25
M31 DEV-FAN-MOT
Developer unit fan
Suctioning toner Fig. 3-16 42-13
M32 LSU-FAN-MOT
Laser unit cooling fan
Cooling down the laser unit Fig. 3-16 32-9
M33 SYS-FAN-MOT
SYS board cooling fan
Cooling down the SYS board and hard disk Fig. 3-20 54-8
M34 PS-FAN-MOT1
Switching regulator cooling
fan-1
Cooling down the switching regulator
(rear side)
Fig. 3-20 52-14
M35 PS-FAN-MOT2
Switching regulator cooling
fan-2
Cooling down the switching regulator
(lower side)
Fig. 3-20 52-14
M36 Exposure lamp cooling fan-
1 Cooling down the
exposure lamp
Cooling down the exposure lamp Fig. 3-5 52-14
M37 Exposure lamp cooling fan-
2 Cooling down the
exposure lamp
Cooling down the exposure lamp) Fig. 3-5 52-14
M38 Scanner unit cooling fan
Cooling down the scanner
unit
Cooling down the scanner unit Fig. 3-5 52-14
M41 LCF-TRY-MOT
Tandem LCF tray-up motor
Lifting up the tray in the tandem LCF
(Only for NAD/SAD/ARD/ASD/AUD/MJD/
CND/TWD model of all equipments)
Fig. 3-19 31-34
M42 LCF-ENDF-MOT
Tandem LCF end fence
motor
Driving the end fence in the tandem LCF
(Only for NAD/SAD/ARD/ASD/AUD/MJD/
CND/TWD model of all equipments)
Fig. 3-19 9-22
MR1 Original feed motor Driving the original feed roller, pickup roller
and registration roller
Fig. 3-26 87-14
MR2 Read motor Transporting originals by driving the
intermediate transport roller, front read
roller, rear read roller and reverse
registration roller
Fig. 3-26 87-7
MR3 Original reverse motor Driving the original reverse roller Fig. 3-26 87-28
MR4 Original exit motor Driving the original exit roller Fig. 3-26 87-9
FR1 RADF cooling fan Cools off the RADF drive section. Fig. 3-26 89-16
Symbol Name Function Remarks P-I
To Next Page
Loading...
