Toshiba e-STUDIO656 - Page 73

3
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
OUTLINE OF THE MACHINE
3 - 31
S28 SFB-SIZE-SNR
Bypass paper size
detection sensor
Detecting the width of the paper on the
bypass feed unit
Fig. 3-17 12-9
S29 CST1-SNR
1st drawer detection
sensor
Detecting the presence of the 1st drawer Fig. 3-18 7-18
S30 CST1-BTM-SNR
1st drawer bottom sensor
Detecting the lowering status of the tray in
the 1st drawer
Fig. 3-18 30-26
S31 CST1-EMP-SNR
1st drawer empty sensor
Detecting the presence of the paper in the
1st drawer
Fig. 3-18 7-18
S32 CST1-TRY-SNR
1st drawer tray-up sensor
Detecting the lifting status of the tray in the
1st drawer
Fig. 3-18 7-18
S33 CST1-TR-SNR
1st drawer transport sensor
Detecting the paper transport at the paper
feeding system of the 1st drawer
Fig. 3-18 7-18
S34 CST1-FEED-SNR
1st drawer feed sensor
Detecting the paper feeding status of the
1st drawer
Fig. 3-18 7-18
S35 CST2-SNR
2nd drawer detection
sensor
Detecting the presence of the 2nd drawer Fig. 3-18 7-18
S36 CST2-BTM-SNR
2nd drawer bottom sensor
Detecting the lowering status of the tray in
the 2nd drawer
Fig. 3-18 30-26
S37 CST2-EMP-SNR
2nd drawer empty sensor
Detecting the presence of the paper in the
2nd drawer
Fig. 3-18 7-18
S38 CST2-TRY-SNR
2nd drawer tray-up sensor
Detecting the lifting status of the tray in the
2nd drawer
Fig. 3-18 7-18
S39 CST2-TR-SNR
2nd drawer transport
sensor
Detecting the paper transport at the paper
feeding system of the 2nd drawer
Fig. 3-18 7-18
S40 CST2-FEED-SNR
2nd drawer feed sensor
Detecting the paper feeding status of the
2nd drawer
Fig. 3-18 7-18
S41 CST3-SNR
3rd drawer detection
sensor
Detecting the presence of the 3rd drawer or
the tandem LCF
Fig. 3-18 7-18
S42 CST3-BTM-SNR
3rd drawer bottom sensor
Detecting the lowering status of the tray in
the 3rd drawer
(Only for JPC model of all equipments)
Fig. 3-18 30-26
S43 CST3-EMP-SNR
3rd drawer / tandem LCF
empty sensor
Detecting the presence of the paper in the
3rd drawer or the tandem LCF
Fig. 3-18 7-18
S44 CST3-TRY-SNR
3rd drawer / tandem LCF
tray-up sensor
Detecting the lifting status of the tray in the
3rd drawer or the tandem LCF
Fig. 3-18 7-18
S45 CST3-TR-SNR
3rd drawer / tandem LCF
transport sensor
Detecting the paper transport at the paper
feeding system of the 3rd drawer or the
tandem LCF
Fig. 3-18 7-18
S46 CST3-FEED-SNR
3rd drawer / tandem LCF
feed sensor
Detecting the paper feeding status of the
3rd drawer or the tandem LCF
Fig. 3-18 7-18
S47 CST4-SNR
4th drawer detection
sensor
Detecting the presence of the 4th drawer
(Only for JPC model of all equipments)
Fig. 3-18 7-18
S48 CST4-BTM-SNR
4th drawer bottom sensor
Detecting the lowering status of the tray in
the 4th drawer
(Only for JPC model of all equipments)
Fig. 3-18 30-26
S49 CST4-EMP-SNR
4th drawer empty sensor
Detecting the presence of the paper in the
4th drawer
(Only for JPC model of all equipments)
Fig. 3-18 7-18
S50 CST4-TRY-SNR
4th drawer tray-up sensor
Detecting the lifting status of the tray in the
4th drawer
(Only for JPC model of all equipments)
Fig. 3-18 7-18
S51 CST4-TR-SNR
4th drawer transport
sensor
Detecting the paper transport at the paper
feeding system of the 4th drawer
(Only for JPC model of all equipments)
Fig. 3-18 7-18
Symbol Name Function Remarks P-I