EasyManua.ls Logo

Toshiba e-STUDIO656 - Page 842

Toshiba e-STUDIO656
1094 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
e-STUDIO556/656/756/856(Ver03) © 2012 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
11 - 24
Fig. 11-2
Notes:
The display of items on this screen varies depending on the types of data written on the USB
media. Each item is displayed only when each data file is written on the USB media in the
following conditions.
If the USB media are not recognized properly, “Set Correct USB Storage Device” message is
displayed. In this case, disconnect the USB media and connect it again within 3 minutes, or
shut down the equipment and connect the device properly. Then repeat the procedure from
(4).
If any of the error messages below is displayed, confirm if the update program or the data file
in the USB media is correct. Then repeat the procedure from (4)
(6) Select the item with the digital keys.
“*” is displayed next to the selected item. Display or delete the “*” by pressing the number of the
item.
(7) Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
Item Condition
1. SYSTEM FIRMWARE (OS Data) T190SFPWxxxx.tar is written. (xxxx is version.)
2. SYSTEM SOFTWARE (HD Data) T190HDPWxxxx.tar is written. (xxxx is version.)
Error
number
Error message Cause
01 Error Loadmodule
Module loading failed.
02 Machine Model Get Error
Model information was not downloaded.
03 Copy Data with valid signature in USB Storage
Checking of data file failed.
04 Other models ROMDATA TXXXXXXXX
* xxxx.xxx x
Ç…ÇÕÅAÉoÅ[ÉWÉáÉìÇ™ï\é¶ÇŠÇÍÇÈÅB
Master data of other model are stored.
05 Copy Signature File in USB Storage Data files are not stored in the USB
media.
06 Patch and Normal package in one folder of
USBStorage
When both the system and patch update
packages are in the USB media.
Item Remarks
1. SYSTEM FIRMWARE (OS Data) Updating OS data
2. SYSTEM SOFTWARE (HD Data) Updating Master data
Status display during update Status display when update is completed
SYSTEM FIRMWARE (OS Data)
update in progress
SYSTEM FIRMWARE (OS Data) Completed
SYSTEM SOFTWARE (HD Data)
update in progress
SYSTEM SOFTWARE (HD Data) Completed
9
9
99

Table of Contents

Other manuals for Toshiba e-STUDIO656

Related product manuals