Toshiba HX7+ ASD - Page 256

HX7+ ASD Installation and Operation Manual 247
System Integration Precautions, 8
System Operation, 44
T
T/L3, 24
Tension, 144
Tension Torque Bias Input, 144
Terminal Selection Parameters, 61
Torque Boost Adjustment, 176
Torque Command, 143
Torque Command Filter, 143
Torque Command Mode, 146
Torque Control, 65
Torque Limit Group, 181
Torque Limit Mode, 148
Torque Limit Mode (Speed Dependent), 149
Torque Limit Settings, 65
Torque Proving Fault, 202
Torque Setting Parameters, 64
Torque Speed Limiting, 65
Trip History, 69, 203
Trip Monitor From ASD, 204
Trip Monitor from ASD, 69
Trip Record at Monitor Screen, 204
Trip Save at Power Down Enable, 168
Trip Settings, 64
Trips, 195
Trouble Shooting, 195
TTL I/O, 33
TTL Master Output, 185
Type Reset, 60, 74
Typeform Error, 202
U
U Phase Short Circuit, 202
U/T1, 24
UC, 198
Undervoltage Detection Time, 173
Undervoltage Stall level, 173
Undervoltage Trip, 173
Undervoltage/Ridethrough, 64
Up Key, 39
Upper Deviation Limits, 135
Upper Limit Frequency, 53, 76
Upper Limit Frequency Adjustment, 175
Use Speed Mode, 138
User Notification Codes, 199
User Notification codes, 195
Utility Parameters, 60
V
V Phase Short Circuit, 202
V/f Adjustment, 70
V/f Adjustment Coefficient, 97
V/f Five Point Setting, 70
V/f Group, 180
V/f Pattern, 77
V/T2, 24
Vector Motor Model, 68
Vector Motor Model Autotune Command, 141
Vector Motor Model Slip Frequency Gain, 141
Versions, 60
VI, 28
VI terminal, 30
VI/II Bias Adjust, 149
VI/II Gain Adjust, 150
VI/II Input Speed Control Setup, 101
VI/II Input Torque Control Setup, 101
VI/II Speed Frequency #1, 102
VI/II Speed Frequency #2, 102
VI/II Speed Reference #1, 101
VI/II Speed Reference #2, 102
VI/II Torque Reference Setpoint #1, 102
VI/II Torque Reference Setpoint #2, 103
Viewing Trip Information, 203
Voltage and Frequency Rating of the Motor, 53
Voltage Compensation Coefficient for Dead Time, 153
Voltage Vector Control, 152
Volts per Hertz Setting, 54
W
W Phase Short Circuit, 202
W/T3, 24
Warranty Card, 2
Wizard Finish, 55