SIP TRUNK CONFIGURATION PATTERNS Service URI
11-10 Installation Manual June, 2011
Pattern D - No Reg No Authentication and
Port may be different then 5060 or no SRV records
Parameter Entry
Trunk > SIP Trunking > Service Definition
Registration Mode None
Domain Name IP or domain name
SIP Server IP or domain name: 5060 (Your SIP provider
may use a differen port)
Primary Voice Packet Configuration 1
Primary Audio Codec G729 or G711 (Consult your SIP provider.)
Secondary Voice Packet Configuration 1
Secondary Audio Codec G711 or G729 (Assign the codec not used
for as the primary.)
Network transfer Typically Disabled (Test transfer with on and
off to see which works.)
SIP Trunk Option Interval 60
SIP Trunk Message Option Typically FQDN
SIP Trunk Message to Header Option Typically FQDN
SIP Trunk Register Message From Header Option Typically the same as SIP Trunk Message
Option
SIP Trunk Register Message To Header Option Typically the same as SIP Trunk Message to
Header Option
Trunk -> SIP Trunking -> Service URI
Primary Number
SIP URI 9495833000 (example only)
SIP URI User Name
SIP URI Password
SIP URI Attribute Main
Additional Numbers
SIP URI 9495833001 (example only)
SIP URI User Name
SIP URI Password
SIP URI Attribute
(When Reg mode is Client - Use sub if you do not
want the number to register)
Main
To Next Page
Loading...
