Toshiba IPedge - Add Member Node; Attach Member Node

ADD MEMBER NODE MEETING IP Address Change Procedure
Installation Manual June, 2011 4-19
8. Repeat this process for each Member Node.
ADD MEMBER NODE The following process adds then, attaches the member nodes to the
primary node.
1. Login to the primary node Enterprise Manager.
2. Select Administration > Enterprise > Servers. The first time you
enter this screen the Server Name list will be empty.
3. Click on the Add icon.
4. Enter the Server Name, IP Address and Community Name of the
member node to be added.
5. Click on Detect Server Information. The System Type, Version and
Mac Address information will be displayed.
6. Enter location and any other useful information into the Description
box.
7. Click on the Save icon.
8. Click on the Search icon to display the server list.
ATTACH MEMBER NODE This procedure attaches the member nodes. Part of the attach process is
the database synchronization from member to primary node.
1. If the server list is not displayed select Administration > Enterprise
> Servers.
2. Click to check-mark the member server to attach.
3. Click on the Attach icon.