Enterprise Manager Database Call Processing Database (Primary Node Only)
Installation Manual June, 2011 1-9
When Bacula runs a backup job a copy of the call processing database
(backup.dat) for every node is saved in the Bacula Store.
All applications other than IPedge Call Processing have their own
database. The information is kept locally within a node. The Primary Node
DB does not contain application information other than the applications
running on the Primary.
Call Processing Database
(Primary Node Only)
The system configuration and call processing data for every node is
stored in this database on the Primary Node. The contents of this
database is displayed when an administrator uses Enterprise Manager.
This provides the single page view of a multi-node system. As changes
are made via Enterprise Manager the target node processes the change
then, the update is sent to the Primary Node database.
Enterprise Network
Topology
The Enterprise Manager Network Topology database describes all nodes
in an IPedge enterprise network. The Network Topology information is
stored in the Enterprise Manager DB in all nodes This includes:
• Node assignments as the Primary or a Member
• Local node IP address and the IP Address of the Primary node
• IPedge Net identifications
• Other applications
User Database User or station information required for communication such as station to
station calling, Conferencing, call forwarding, others. This data includes
features registered from the stations (call forward, DND, etc.) and for
applications like MyPhoneManager.
To Next Page
Loading...
