IPedge APPLICATIONS Single Page View Management
1-6 Installation Manual June, 2011
Single Page View
Management
A Single Point of Management offers the user a convenient, single
location of entrance or a web site for all management functions of all parts
of the IPedge system, including nodes, application servers, and media
gateways. Without this capability, a user must visit each part of the
system individually. This is the key feature of the Centralized
Management provided by Enterprise Manager.
The Centralized Management organizes the information of all parts of a
system, especially an IPedge Net Enterprise System, and presents it to
the user as a whole for viewing and modifications. Information of each
type; stations, trunks, trunk groups, etc., is presented in one group
instead of being divided by node or site. Changes that are required in all
affected nodes as the consequence of modification in one node are
carried out without user intervention nor having to effect the changes on
individual nodes. Database backup for the entire system is run from the
central location. The central location is the Enterprise Manager on the
Primary node.
IPedge APPLICATIONS The IPedge server in each node is referred to as the Integrated IPedge
server. This server includes these IPedge Applications:
• IPedge Core
• IPedge Call Processing (IPeCP) – All call processing and
OAM functions for the local Integrated IPedge server. Multiple
IPeCPs connected by an IPedge Net work together to form
an Enterprise System.
Each IPeCP has its own configuration data stored internally.
Each IPeCP generates a backup file that contains all of the
IPeCP database (backup.dat).
• Media Relay Server – Required in some network
configurations for NAT traversal solutions.
• IPedge Net Gateway (IPedge Net GW) - The IPedge Net IP
service running in the IPedge server.
• Protocol Converters (PCONV) – Allows the IPedge Call
Processor to process Megaco + and SIP messages.
• Megaco+
•SIP
• Media Server (MS) – Manages all resources used by the
IPedge Call Processor.
• 3 ~ 8 way Conference
• Group Paging
• MOH / BGM source
• DTMF tone generation
• DTMF tone detection
• Call Processing Tone generation (DT, BT, RB, ROT, etc.)
• Call Processing Tone detection
To Next Page
Loading...
