Installation Manual June, 2011 13-1
Chapter 13 – Net Server
Net Server is pre-installed on the IPedge system and can be activated
using IPedge Enterprise Manager. Add Net Server to Enterprise Manager
and configure the IO port in the IPedge system. After applying the license,
Net Server is ready to be used. If further configuration of Net Sever is
necessary for server based Call Manager configuration, please see Net
Server administration section page 13-2for details.
ADD NET SERVER 1. Using your web browser, enter the Enterprise Manager application IP
address.
2. From the Administration menu, select Enterprise > Component
Services.
3. Click the Server Application tab.
4. Click the Add icon.
To Next Page
Loading...
