AUDIOCODES MP118 FXO
12-2 Installation Manual June, 2011
AUDIOCODES MP118 FXO This section is for setting up an AudioCodes MP118 as an FXO gateway.
To setup FXS operation refer to “AUDIOCODES MP118 FXS” on page
Chapter 12 – 10
This is for MP118 release 5.8 or later.
The AudioCodes MP118 defaults:
• IP address: 10.1.10.10
• Username: Admin
• Password: Admin
SET IP ADDRESS Power up the MP118 and connect the NIC to a hub, switch or network.
1. Using a PC connected to the hub, switch or network launch a internet
browser such as Windows Explorer.
2. Enter the IP address of the MP118
3. Login to the MP118.
4. Select CONFIGURE > NETWORK SETTINGS > IP SETTINGS.
Set IP Address, Subnet Mask, and Default Gateway Address
To Next Page
Loading...
