Installation Manual June, 2011 6-1
Chapter 6 – Webmin
Webmin is a graphical user interface used to simplify Linux operating
system management. Webmin lets you perform these tasks through a
web interface, and automatically updates all of the required configuration
files.
Webmin is accessed through Enterprise Manager, select Application >
Webmin. The Webmin application on all of the servers in an enterprise
are accessed through Enterprise Manager on the Primary Node.
Although Webmin is accessed through Enterprise Manager it is not part of
Enterprise Manager. When accessing Enterprise Manager through a fire
wall you must have ports 8080 (Enterprise Manager) and port 10000
(Webmin) open.
STOP SERVICES 1. Select Application > Webmin.
2. In the Webmin screen select System > Bootup and Shutdown.
3. Check-mark the service(s) to stop.
4. Click on the Stop button.
START SERVICES 1. Select Application > Webmin.
2. In the Webmin screen select System > Bootup and Shutdown.
3. Check-mark the service(s) to start.
4. Click on the Start button.
RESTART SERVICES 1. Select Application > Webmin.
2. In the Webmin screen select System > Bootup and Shutdown.
3. Check-mark the service(s) to restart.
4. Click on the Restart button.
REBOOT SYSTEM 1. Select Application > Webmin.
2. In the Webmin screen select System > Bootup and Shutdown.
3. Click on the Reboot button.
To Next Page
Loading...
