HTTPS CERTIFICATE MEETING IP Address Change Procedure
Installation Manual June, 2011 4-17
6. Enter the IP Address of the IPedge server in the Circuit Group
Address field.
This is the end of the Meeting initial configuration.
HTTPS CERTIFICATE If you are going to use https secure connection to the Enterprise Manager
create the https certificate. Refer to the HTTPS Configuration section of
this manual.
Note: For an enterprise system with one or more member servers
create the HTTPS certificate for the Primary server then, attach
the member servers. After the member is attached create the
HTTPS certificate for the member.
If this is a single server, stand-alone system you can now begin
programming. Refer to the call programming sections in the Features
Description manual.
If this is one node of a multi-node system proceed to ASSIGN MEMBER
NODE.
IPedge Server Addr
IPedge Server Addr
To Next Page
Loading...
