Toshiba IPedge - IPedge Enterprise Manager

MP118 MEDIA SETTINGS Load INI file to the Gateway
Installation Manual June, 2011 12-5
Coders 12. Select Protocol Configuration > Protocol Definition > Coders
13. Ensure the following:
Coder Name G.711 mu-law
Packetization Time = 20
Rate = 64
Silence Suppression = Disabled
and
Coder Name G.729
Packetization Time = 20
Rate = 8
Silence Suppression = Disabled
14. Click on the Submit button.
SIP Advanced Parameters 15. Select Protocol Configuration > SIP Advanced Parameters >
Advanced Parameters.
Set the Disconnect on broken connection = No
Set Enable current disconnect = Enabled.
16. Click on Submit.
IP Profile Settings 17. Select Protocol Configuration > Coders And Profile Definitions >
IP Profile Settings
Set the Disconnect on broken connection = No
18. Click on Submit.
Routing Table 19. Select Protocol Configuration > Routing Tables > Routing
General Parameters.
Set Enable alternate routing = Enabled
20. Click on Submit.