NET SERVER MENU Setup
Installation Manual June, 2011 13-9
Field Description
Application Name Name of the application
User or Group Usually, the client name of the user is shown (see Clients). When it is set to
<Default> (or leaving it blank) the settings for the Default User can be
defined. It can be used to define the settings of typical users while any
additional clients that need settings other than those of the Default User
can be defined separately. Each user can be assigned to a group by setting
this number (application may use this to standardize settings/features for
each group).
Read Level This defines the access privileges for being able to read information about
the application. The settings are Denied, Self, Group, or World.
Modify Level This defines the access privileges for being able to modify the information
about the application. The settings are Denied, Self, Group, or World.
Setting # 1 Reserved for future use.
Setting #2 Reserved for future use.
COS Define a COS number. These options are used to control the user access
privileges. COS ranges from 0 to 63 is the sum of values assigned to each
privilege shown below.
Server Admin Privilege Enables the user to do administration of server configuration files.
(value: 1)
Use Server-based
Configuration
When enabled, user will get the program configuration settings from the
server specified by application files. If this is disabled, the user will get
configuration settings from the local PC. (value: 2)
To Next Page
Loading...
