3.31 SETUP 3 Tests and Diagnostics
QOSMIO F20 Maintenance Manual (960-526) [CONFIDENTIAL] 3-99
4. Password
This option sets or resets the user password for power on and instant security (Fn+F1).
Registered The user password has been registered.
Not registered The user password has not been registered.
For details on setting the user password, refer to the User’s Manual.
5. Boot Priority
(a) Boot Priority
Use this option to set the priority for booting of the computer and the priority for the
HDD for booting.
FDD? HDD? CD-ROM? LAN: The computer looks for bootable files in the
following order: FDD, HDD, CD-ROM
(*1) and LAN.
HDD? CD-ROM? LAN? FDD: The computer looks for bootable files in the
following order: HDD, CD-ROM, LAN
and FDD.
FDD? CD-ROM? LAN? HDD: The computer looks for bootable files in the
following order: FDD, CD-ROM, LAN
and HDD.
CD-ROM? LAN? HDD? FDD: The computer looks for bootable files in the
following order: CD-ROM, LAN, HDD
and FDD.
CD-ROM? LAN? FDD? HDD: The computer looks for bootable files in the
following order: CD-ROM, LAN, FDD
and HDD.
HDD? FDD? CD-ROM? LAN: The computer looks for bootable files in the
following order: HDD, FDD, CD-ROM
and LAN. (Default)
(*1) CD-ROM refers to an Optical Disk Drive.
(b) Network Boot Protocol
Use this option to set the starting method via a network.
PXE Sets to PXE protocol. (Default)
RPL Sets to RPL protocol.
To Next Page
Loading...
Need help?
General