Toshiba QOSMIO F20

4.18 USB board/Speaker 4 Replacement Procedures
QOSMIO F20 Maintenance Manual (960-526) [CONFIDENTIAL] 4-51
5. Take out the speaker cable from the guide of the cable holder (R) and remove the
Speaker (R) from the slot of the base assembly.
6. Remove the following screws and Cable holder (R).
? M2.5?6S TAPPING x2
Figure 4-39 Removing the speaker(R)
Speaker (R)
Cable holder (R)
M2.5?6S TAPPING