⎯ 138 ⎯
6 F 2 S 0 7 1 5
⑤ To change the scale of the vector diagram, click [Auto Scale] option to deactivate the
automatic scale.
Then, type the scale values in [Voltage] and [Current] text boxes.
･ Type the values for 1 scale.
⑥ Click【OK】button.
･ The vector diagram is displayed with the setting contents.
⑦ To change the current setting of the reference phase, click [Set], and then click
[Reference Phase].
⑧ Click the down arrow button that appears just to the right of [Phase Order] drop-down
list box and select the phase order to be the reference phase.
⑨ Click【OK】button.
･ The vector diagram is displayed with the new reference phase.
･ The reference phase selected by the operation is used to display other analysis values.
2-26
To Next Page
Loading...