⎯ 139 ⎯
6 F 2 S 0 7 1 5
■Displaying Vector Diagram Consecutively
This part describes how to display the variation of vectors in the specific range consecutively.
《Operating Procedure》
① Click the [Consecutive Renewal] menu.
② Type the beginning and the ending points of the range to be displayed consecutively
in [Calculate Range] text boxes.
･ To display the interval between Cursor 0 and the active cursor consecutively, click【Cursor 0-*】button.
( [*] is the active cursor No.)
･ Even when the relative time display is selected, type the elapsed time from the beginning of the
waveforms.
･ To display the entire range, click【All】button.
③ Type the interval of the measurement points to display the vector diagram in [Interval
of Calculation Points] text box.
④ Type the updating interval to display the vector diagram in [Interval of Renewal Time]
text box.
2-27
To Next Page
Loading...