⎯ 100 ⎯
6 F 2 S 0 7 1 5
1.6 Creating Line Element and Zero-
Phase Element
This section describes how to create new line element and zero-phase element form the
selected analog elements.
《Note for Operation》
● You can created line elements and zero-phase elements from the following elements:
Va・Vb →Vab Ia・Ib →Iab
Vb・Vc →Vbc Ib・Ic →Ibc
Vc・Va →Vca Ic・Ia →Ica
Va・Vb・Vc →Vo Ia・Ib・Ic →Io
● When you create a zero-phase element, it is registered in the phase order setting
processed internally.
(The created zero-phase element is used for the analysis calculation.)
《Operating Procedure》
① Click the element segment of the waveform from which you want to create a line or
zero-phase element (only 1).
1-24
To Next Page
Loading...