⎯ 46 ⎯
6 F 2 S 0 7 1 5
4.4.8 LED and Communication Status
Click the [LED/Comm] tab, then the status of LED and communication will be displayed on the
[LED/Comm] screen (only G1IF4).
The status of LED is displayed by “G”, “R” or “Y” (Green, Red or Yellow). The reverse display
shows the lighting status. If clicking the [Latch Reset] button, the latched LEDs are reset. The
lamp test of LEDs is performed by clicking the [Lamp Test] button.
The status of communication is displayed by “NG” or “OK”.
To Next Page
Loading...