⎯ 47 ⎯
6 F 2 S 0 7 1 5
4.5 Operation of Setting Menu
4.5.1 On-line Operation
Click the [Setting chg.] button on the [Top menu] screen, then the setting data are extracted from
the relay and the following [Password] screen will appear.
To change the settings, enter the password and click the [OK] button. If the password is not
entered correctly, the following screen will appear.
To only view the settings, click the [Setting view] button. No password is required for viewing.
Note: If the password is not entered correctly, both of the [Send] and [Send all] buttons do not
appear on the [Setting menu] screen and the new settings cannot be sent to the relay.
The setting [Sub-menu] screen will appear and the settings can be viewed or changed on each
sub-menu shown on the [Sub-menu] screen.
Note: Setting, changing or canceling the password can be done only from the LCD of the
front panel of the relay.
Depending on the relay types, the following menu screen will appear:
To Next Page
Loading...