⎯ 96 ⎯
6 F 2 S 0 7 1 5
1.5 Editing Waveform
This section describes how to move and overlay waveforms.
■Moving Waveform
■Overlaying Waveform
■Moving Waveform
This part describes how to move a waveform in a channel to other channel with its elements
(The sequence of channel display changes.).
《Operating Procedure》
① Click the element segment of the waveform that you want to move (only 1).
② On the [Edit] menu, click [Select].
1-20
To Next Page
Loading...