⎯ 45 ⎯
6 F 2 S 0 7 1 5
4.4.6 Count Status
Click the [Count] tab, then the status of any of the following counts is displayed depending on the
relay type and model:
• Telecommunication channel test counts with test interval
• Trip circuit test counts with test interval
• Autoreclose output counts
• Trip output counts
• Circuit breaker and disconnector operation counts
The count can be reset to zero by clicking the [Count reset] button.
Depending on the relay types, the following screen is displayed.
4.4.7 Terminal Status
Click the [Terminal] tab, then the status of the terminal conditions is displayed. However, this tab
is provided depending on the relay type and model.
To Next Page
Loading...