⎯ 64 ⎯
6 F 2 S 0 7 1 5
4.6 Operation of Test Menu
The [Test] menu provides the following functions in on-line operation: disabling automatic
monitoring, starting automatic tests manually, time measurement of the variable setting timer,
observation of the logic signal and mode change(only GR∗∗∗∗-∗∗∗D model and G1IF4).
Caution: Do not close the test menu before resetting all test switches to original ones. The relay
cannot be in service while any test switch is set to test status. The test switch is used to
disable the relay function or to forcibly control the relay operation for testing.
Click the [Test] button on the [Top menu] screen, then the following [Test] screens will appear.
• When local connection
Note: The [Test] button is deactivated at the top menu when remote connection.
• GR∗∗∗∗-∗∗∗D model and G1IF4: When local connection
Mode change
button display
To Next Page
Loading...