⎯ 63 ⎯
6 F 2 S 0 7 1 5
With connecting to the relay:
Once the setting data have been saved in the PC, choose off-line operation by clicking the
[Off-line] button on the [Start up] or [Top menu] screen.
Click the [Setting] button on the top menu screen to display the file [Open] screen. Choose and
open the file, then the [Setting menu] screen will appear.
The operations for changing the setting data are the same as those described for on-line mode
operation.
After changing the setting data, click [Save As] on the [File] menu of the [Setting menu] screen,
and save the data in a new file or overwrite them in the existing file.
To change the settings in the relay after off-line operation, do the following:
• Click the [On-line] button on the [Top menu] screen. When accessing from a local PC, click
the [OK] button on the [Choose relay] dialog box. When accessing from a remote PC, choose
the relay to be accessed on the [Choose relay] dialog box and click the [OK] button.
• Click the [Setting] button, then setting data is extracted from the relay and the [Password]
window will appear. Enter the password and click the [OK] button.
• If the password is correct, the [Setting menu] screen will appear.
• Click [Open] on the [File] menu and open the file which contains the new setting data. Then the
setting data extracted from the relay is overwritten with the new data on the PC.
• Click the [Send all] or [Send] button and the [Confirmation] dialog box will appear.
• Click the [Yes] button to send the new settings to the relay. Then the settings in the relay are
changed to the new settings and the screen returns to the [Top menu] screen.
To Next Page
Loading...