⎯ 95 ⎯
6 F 2 S 0 7 1 5
⑤ You can activate other cursor by clicking the cursor button in the toolbar in addition to
by selecting the cursor by the operation of the step ①.
⑥ When the measurement and analysis values are displayed, the position of the active
cursor is displayed with the elapsed time from the beginning of the waveform to the
position.
･ The displayed time can be replaced with the relative time (time from Cursor 0).
(→2.2 Displaying Measurement Value of Waveform ■Displaying Relative Time)
1-19
To Next Page
Loading...