⎯ 94 ⎯
6 F 2 S 0 7 1 5
② Double-click the position to where you want move the cursor.
･ The selected cursor(active cursor) moves to the position.
･ You can move the cursors by dragging them. By this operation, non-active cursor becomes active
automatically by dragging it.
③ The elapsed times from the beginning of the waveforms to the cursors are displayed
in the bottom of the screen.
Cursor No.
④ In addition, by using
or button, you can move the cursor by 1 cycle.
By using
or button, you can move the cursor by 1 sample.
1-18
To Next Page
Loading...