⎯ 160 ⎯
6 F 2 S 0 7 1 5
RSM100 setting data is recommended to be saved as follows:
1. Naming for RSM100 setting data
The RSM100 setting data name is recommended to be provided with a revision number in order to
be changed in future as follows:
First draft: ∗∗∗∗∗∗_01
Second draft: ∗∗∗∗∗∗_02
Third draft: ∗∗∗∗∗∗_03
Revision number
The name “∗∗∗∗∗∗” is recommended to be able to discriminate the relay type such as GRZ100 or
GRL100, etc.
2. Saving the RSM100 setting data
The RSM100 setting data is recommended to be saved in external media such as FD (floppy disk)
or CD-R, not to remain in the folder.
<The file extension of the RSM100 setting data>
If the file is lack, it is not able to read in the setting data. It is necessary to save all of the files and
add the file extension for confirmation.
(1) Binary data
dat
dat1 Creating on the record screen only
dat1A dat1A is only created on the model with Alarm record.
dat2
dat3
dat3A・・・dat3A may be created by the model.
set
(2) Text data
dat4,dat5,dat6～・・・The number of files differ according to the model/type.
(The maximum number of files is 8.)
datz ・・・Creating by GRZ100 only.
(The file may not be created by the model.)
To Next Page
Loading...