⎯ 20 ⎯
6 F 2 S 0 7 1 5
via telephone line. The communication via telephone line will be cut by clicking this [Disconnect]
button.
When accessing with TCP/IP;
When accessing via Ethernet LAN, choose [TCP/IP] on the [Option] of the [Communication] at
the top menu. The following screen is displayed.
The Response timeout should not be changed and retain the default. Change it, if it takes time for
connection such as a network using dialup router, etc.
Click “OK” button to return the [Start up] screen and click [On-line] button.
If the following message is displayed, specify a file for IP address setting in the file selection
dialog.
To Next Page
Loading...