⎯ 30 ⎯
6 F 2 S 0 7 1 5
To save the extracted disturbance record in the floppy disk or internal memory, click [Save as] on
the [File] menu of the oscillograph screen and enter a file name in the [Save As] dialog box. The
data are saved with the extension of .osc.
The fault, event and disturbance records can be printed independently. Click the [Print] button on
the [File] menu of the [Fault record] screen to print all the fault records shown on the display at this
time. Click the [Print] button on the [File] menu of the [Event record] screen to print all the event
records. To print the disturbance record, choose a disturbance to print and click the [Print] button
on the [File] menu of the [Oscillograph] screen.
The fault and event records can be output to a .csv file independently. Click the [Output] button
on the [File] menu of the [Fault record] screen to output all the fault records shown on the display
at this time. Click the [Output] button on the [File] menu of the [Event record] screen to output all
the event records.
Status data
Click the [Status] button on the [Top menu] screen, then the status data at extraction will be
displayed on the [Metering], [Binary input], [Binary output], [Element], [Terminal], [Time] and
[Count] screens. The data cannot be saved in the PC nor printed.
Setting data
Click the [Setting view] or [Setting chg.] button on the [Top menu] screen, then the setting data
will be saved in the PC buffer memory and the [Sub-menu] screen will be displayed.
To save the extracted setting data in the floppy disk or internal memory, click [Save as] on the
[File] menu of the [Sub-menu] screen, and enter a file name in the [Save As] dialog box. All the
setting data are saved with the extension of .set.
When reading data that have already been saved on-line, the system checks whether the following
data match or not and prevents unmatched data from being loaded:
• Relay format
• Rated current
• Rated frequency
Note that unmatched data other than these (for example, rated voltage) will be loaded.
To print the settings, click [Print] on the [File] menu of the [Sub-menu] screen or individual setting
To Next Page
Loading...