⎯ 33 ⎯
6 F 2 S 0 7 1 5
Click the [Primary] or [Secondary] button to display the voltage and current values on the
primary side or secondary side.
Click the [Before fault] or [During fault] button to display the voltage and current values before
or during fault occurrence.
The [Information] button to display the data of autoreclose is provided depending on the relay
type and model.
Click [Print] on the [File] menu to print out the record data.
Click the [Top menu] button to return to the [Top menu] screen.
Note: Move the border line if the part of value isn’t displayed in the default width.
Event record
Click the [Event record] tab, then the [Event record] screen will appear on the top of the record
screens.
The event records are displayed in order of new to old.
To Next Page
Loading...