⎯ 57 ⎯
6 F 2 S 0 7 1 5
Note: By upgrading the relay software, "deleted" is displayed on the column instead of the deleted
setting item. Since RSM is designed to have upper compatibility.
This screen depends on the relay type and model.
In the above screen, [Parameter] is used to set the line name, VT ratio, CT ratio, line impedances
(X1 to R0m), line imbalance compensation factors (Kab to Kc) and line length. The line
parameters are required for the fault locator.
The [Trip(switch)] screen is used to set the protection scheme and scheme switches.
The [Trip(Element)] screen is used to set the measuring elements, their compensation factors and
timers.
To Next Page
Loading...