⎯ 66 ⎯
6 F 2 S 0 7 1 5
Manual test
The automatic test can be started manually on this screen. The automatic test depends on the relay
type and model.
Click the [Manual test] tab to open the screen.
Just click each button to execute the manual test. One of the following results pops up on a
window.
1. “Completed.”
2. “Remote1 failed.”
3. “Remote2 failed.”
4. “Remote1/2 failed.”
5. “Not started. Conditions are unsatisfactory.”
6. “Not started. Testing from LCD is in progress.”
Timer test
The delayed pickup or delayed drop-off time of the variable timer can be measured with
monitoring jacks A and B on the front panel of the relay.
Click the [Timer] tab to open the screen.
To Next Page
Loading...