Toshiba RSM 100 - Setting Parameters for Binary Elements

⎯ 87 ⎯
6 F 2 S 0 7 1 5
⑩ Click【OK】button.
･ The setting details are reflected in the display.
⑪ To set the parameters for other channel, repeat the steps ②～⑩.
･ When you want to set parameters for a channel with the settings that are almost same as a channel you
have already set, display [Edit Analog Element] dialog box of the latter channel. Then, click the down
arrow button that appears just to the right of [Ch] drop-down list box and click the channel you want to set.
The parameter settings of the new channel are the same as the previous channel. Modify only the
parameter settings that you need to modify.
⑫ To print the setting details of the element table, click【Print】button.
⑬ Click【OK】button.
･ The parameters for the analog elements are set.
1-11