Toshiba TECRA A9 Series - Chapter 6: If Something Goes Wrong; Problems that are easy to fix

3 Tests and Diagnostics 3.20 ONLY ONE TEST
3-48 [CONFIDENTIAL] TECRA A9(S5/P5/S200) Maintenance Manual (960-633)
When there is no defective during the all checks above, the following message
appears in the display. Then press Enter and return to the Only One Test
menu.
** Setting OK! **
Press [Enter] key
When any trouble in the above setting is found, the following message appears
and the test halts. Then press Enter and return to the Only One Test menu.
** Setting ERROR! **
Press [Enter] key
3.20.8 Subtest 8 Docker Dock/Undock
This subtest is executed with an Express Port Replicator installed.
Press Enter while pushing the eject button of the Express Port
Replicatorafter the following message appears.
Slide Eject-SW, and press [Enter] Key
Press Enter without pushing the eject button of the Express Port Replicator
after the following message appears.
Release Eject-SW, and press [Enter] Key
If the test ends successfully, the display returns to the ONLY ONE TEST
menu.
When the display returns to the ONLY ONE TEST menu, remove the Express
Port Replicator from the computer.