4 Replacement Procedures 4.31 Speaker
Installing the Speaker
To install the speaker, follow the steps below and refer to Figure 4-54 to 4-57.
1. Install the speakers (left and right) to the speaker covers (left and right).
2. Arrange the speaker cable into the slot of the front of the cover assembly.
3. Pass the speakers through the holes of the cover assembly.
Speaker (left)
Speaker cable (White and green)
Hole
Speaker (right)
Hole
Speaker cable (Black and red)
Figure 4-57 Installing the speaker
4. Install the speakers (left and right) to the slots (left and right).
5. Pass the speaker cable through the hole of the cover assembly and stick the
insulator in place.
4-98 [CONFIDENTIAL] TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633)
To Next Page
Loading...
