Toshiba TECRA A9 Series Maintenace Manual

4.4 Bridge media 4 Replacement Procedures
4.4 Bridge media
Removing the Bridge media
To remove the Bridge media, follow the steps below and refer to Figure 4-3.
CAUTION: Before you remove the Bridge media, refer to the media’s documentation
and to your operating system documentation for proper procedures and
precautions.
1. Push the Bridge media. It will pop out partly, so pull out the card. (For an instance,
SD card is described in the figure 4-3.).
Bridge media (SD card)
Figure 4-3 Removing the Bridge media
Installing the Bridge media
To install the Bridge media, follow the steps below and refer to Figure 4-3.
1. Insert the Bridge media into the card slot.
2. Push it carefully to ensure a firm connection.
TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633) [CONFIDENTIAL] 4-11

Toshiba TECRA A9 Series Specifications

General

Processor	Intel Core 2 Duo
Display	15.4-inch
Display Resolution	1280 x 800 pixels
RAM	Up to 4 GB
Operating System	Windows Vista
Optical Drive	DVD-RW
Wireless	802.11a/g/n
Ports	USB 2.0, VGA, Ethernet, Headphone