3.30 BIOS SETUP 3 Tests and Diagnostics
Moving Within the SETUP Menu and Changing Values
1. Press Å and Æ to move between the two columns. Press ↑ and ↓ to move between
items in a column. Press Fn+↑ (PgUp) and Fn + ↓ (PgDn) to move between the
two pages.
2. Press either the Space bar or Back Space to change the value.
Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following message is
displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following message is displayed:
TECRA A9(S5/P5/S200) Maintenance Manual (960-633) [CONFIDENTIAL] 3-85
To Next Page
Loading...
