3.30 BIOS SETUP 3 Tests and Diagnostics
TECRA A9(S5/P5/S200) Maintenance Manual (960-633) [CONFIDENTIAL] 3-87
SETUP Options
The SETUP screen is divided into functionally related groups. This section describes each
group and its options.
1. Memory
This group of options displays the computer’s memory.
(a) Total
This field displays the total amount of memory installed and is automatically
calculated by the computer. You cannot change this value.
2. System Date/Time
Use this option to set the computer’s system date/time.
(a) Date
Use this option to set the system date of the computer.
(b) Time
Use this option to set the system time of the computer.
3. Password
(a) User Password
This option allows you to set or reset the user password for power on.
Registered A password has been registered.
Not Registered Change or remove the password. (Default)
(c) Supervisor Password
This setting, which is displayed on the first page of the setup screen, allows you
to register a Supervisor Password of the computer.
Registered Supervisor Password has been registered.
Not Registered Supervisor Password has not been registered (Default).
For details on setting the password, refer to the Online Manual.
To Next Page
Loading...
Need help?
General
