4 Replacement Procedures 4.16 Fingerprint sensor board
3. Remove the fingerprint sensor board fixed with the double-sided tape and peel off
the double-sided tape that prevents a waterdrop from entering the computer.
4. Disconnect the fingerprint sensor cable from the connector on the fingerprint
sensor board.
Fingerprint sensor board
Fingerprint sensor cable
Double-sided tape
Connector
Guide
Figure 4-27 Removing the fingerprint sensor board
4-44 [CONFIDENTIAL] TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633)
To Next Page
Loading...
